Standard PLA features odorless, low volatility, safety, and environmental protection.

Printed parts with good stability, low shrinkage, smooth surface, and high-grade texture.

Compatible with most FDM printers. It is a basic material that supports high-speed printing, which is easy to print and prototype.

Standard PLA captures the features of high strength, high hardness, good toughness, and fast construction speed.

Yes, Matte PLA and PLA Pro can maintain their excellent performance even under high-speed printing.

There are several advantages:
(1) Surface Quality at high speed:
When FDM is printing, the nozzle will continuously change between the min speed and max speed. The higher the max speed, the wider the range of speeds. The issue is with the printing temperature being the same, the extrusion temperature will vary dramatically making the adhesion between layers uneven. These differences are invisible to the naked eye, but they will be particularly obvious on the prints if they appear in each layer, thus making the surface quality of the prints worse. High Speed filament reduces these differences by improving the accuracy of inter-layer adhesion in a wide range of flow rates, allowing prints to have higher precision and more clear details.

(2) Mechanical Properties at high speed:
High Speed filament will display far greater overall mechanical properties when printed at higher speed than regular filament because of the more consistent extrusion and the optimized cooling/melting rate of the polymer.

(3) Higher Printing Efficiency:
Thanks to (1) and (2), the production speed has increased exponentially, and 3D printing can output the same quality part at a much higher pace. This advantage makes 3D printing more suitable for producing products.

PLA Pro adopts toughening technology, which makes its toughness exceed 90% of PLA materials on the market.
You can check the tensile modulus and impact strength data in its TDS, which represent its toughness, and compare it with other materials of our portfolio.

PLA Pro features toughening technology which significantly increases its ductility, allowing PLA Pro to exhibit excellent plastic deformation before fracture.

Materials products typically have no expiration date and can be used indefinitely. However, PLA filaments need to be sealed and stored after opening to prevent moisture.

If the material gets damp, bake it in a drying oven at 50–60°C for 6–8 hours before use. Please note that this method cannot restore the consumables to their optimal condition.

PLA Pro has excellent impact resistance. The printed parts are not easy to break and have smooth surfaces, making it suitable for parts with certain requirements on toughness.
Matte PLA has higher strength and hardness. The printed parts have better wear resistance and are not easy to scratch; the surfaces have a matte frosted texture, which can better hide layer unevenness and make the prints have an excellent surface finish.

Yes, Matte PLA and PLA Pro can maintain their excellent performance even under high-speed printing.

There are several advantages:
(1) Surface Quality at high speed:
When FDM is printing, the nozzle will continuously change between the min speed and max speed. The higher the max speed, the wider the range of speeds. The issue is with the printing temperature being the same, the extrusion temperature will vary dramatically making the adhesion between layers uneven. These differences are invisible to the naked eye, but they will be particularly obvious on the prints if they appear in each layer, thus making the surface quality of the prints worse. High Speed filament reduces these differences by improving the accuracy of inter-layer adhesion in a wide range of flow rates, allowing prints to have higher precision and more clear details.

(2) Mechanical Properties at high speed:
High Speed filament will display far greater overall mechanical properties when printed at higher speed than regular filament because of the more consistent extrusion and the optimized cooling/melting rate of the polymer.

(3) Higher Printing Efficiency:
Thanks to (1) and (2), the production speed has increased exponentially, and 3D printing can output the same quality part at a much higher pace. This advantage makes 3D printing more suitable for producing products.

Materials products typically have no expiration date and can be used indefinitely. However, PLA filaments need to be sealed and stored after opening to prevent moisture.
If the material gets damp, bake it in a drying oven at 50–60°C for 6–8 hours before use. Please note that this method cannot restore the consumables to their optimal condition.

Good dimensional stability with low shrinkage, smooth and delicate surface, offering high quality.

Easy to print, allowing for quick prototyping; compatible with most FDM 3D printers on the market.

A high-temperature-resistant material that supports high-speed printing, suitable for a wider range of applications.

High strength, high hardness, good toughness, and fast build speed.

Compatible with most FDM 3D printers on the market.

High rigidity and bending resistance, high hardness and toughness, easy assembly, and strong mechanical performance.

Carbon fiber filament, with a carbon fiber content of 15%. The added carbon fiber, combined with a premium matte finish, significantly reduces visible layer lines and delivers an exceptionally smooth, refined surface appearance.

Supports high-speed printing with excellent melt flowability.

High-dimensional accuracy; the contact surface on the build platform is not prone to warping or deformation.

Printed parts have a delicate and smooth finish, and are easy to print.

Silk-like texture with bright, lustrous colors.

Compatible with most FDM 3D printers on the market, it offers broad compatibility and user-friendly print settings.

With exceptional dimensional stability, it is ideal for functional testing and printing high-performance parts.

Printed parts feature a smooth and refined surface finish, delivering a premium texture and impressive visual appeal.

The material combines excellent toughness and interlayer adhesion strength, enabling high-speed printing with outstanding building efficiency.

Compatible with most FDM 3D printers on the market, it offers broad compatibility and user-friendly print settings.

With exceptional dimensional stability, it is ideal for functional testing and printing high-performance parts.

Printed parts feature a smooth and refined surface finish, delivering a premium texture and impressive visual appeal.

The material combines excellent toughness and interlayer adhesion strength, enabling high-speed printing with outstanding building efficiency.

Compatible with 99.99% of FDM printers on the market.

Typical applications: shock-absorbing pads for machinery, buffer blocks for conveyor systems, flexible robotic joint covers, sports protective gear, etc.

High-speed printing capable, clog-resistant for improved print success rate.

Smooth surface finish with strong interlayer adhesion, low shrinkage rate ensures accurate print dimensions.

Smooth surface finish with strong interlayer adhesion, low shrinkage rate ensures accurate print dimensions.

Typical applications: wear-resistant guide rails for industrial robots, cushioning components in automation equipment, high-load motion gear parts, and more.

Smooth surface texture capable of rendering sharp text and fine pattern details.

Outstanding wear resistance, ideal for moving/mechanical parts.

Ideal for printing complex parts and models, automotive components, appliance housings, and toys.

Supports high-speed printing with a maximum infill speed of up to 450 mm/s.

It offers outstanding impact strength and wear resistance, enables fast construction, and minimizes part deformation.

ABS is a high-toughness, durable, and heat-resistant 3D printing filament with excellent printer compatibility.

Compatible with most FDM 3D printers on the market, ideal for outdoor applications and general engineering parts.

Printed models show strong weather resistance, are less prone to damage, aging, or fading, and feature a fine, smooth surface texture.

It offers excellent UV resistance, high-temperature durability, superior toughness, and long-lasting performance.

ASA features high strength, hardness, and toughness, enabling fast construction.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

Unless specifically indicated, NextShapes resin is not approved for use with food, drink, or for medical application on or in the human body. Do not attempt to use printed parts for purposes other than the described application.

For information about the material properties of NextShapes resins, consult the Technical Data Sheets (TDS).
To learn more about specific resins and their applications, read the product details page to choose the right material.

NextShapes has not performed testing on gas permeability of its materials. Parts printed on LCD printers are water-tight and non-porous if they are printed as a sealed, continuous structure.

Resin can be stored in resin tanks for up to three months under closed conditions. Storing longer than the recommended time may cause resin to leak and damage equipment.
If the printer is not used for a long time, do not leave excess resin in the vat, as this may lead to resin curing and affect the next print. The resin remaining after printing can be reused, but it is recommended to filter it into a new container rather than returning it to the original cartridge to avoid contamination.

Dust, smudges, or lint on the LCD surface may affect printing quality. It is recommended to keep the LCD screen clean at all times.

Method 1 – Dry Cleaning:
Use a dust-free cloth to gently remove visible dust and lint from the surface.

Method 2 – Wet Cleaning:
Spray a small amount of 95% sanitizing alcohol on the LCD to remove cured resin, smudges, or fingerprints. Use a soft paper towel or dust-free cloth and wipe in one direction to clean the surface thoroughly.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

We recommend that you choose Precision ProX White material. Precision ProX White printed parts have a smooth and delicate surface as well as extremely high impact resistance, making it the best choice for prototyping.

For functional prototypes, if high impact resistance is your main design requirement, then we recommend you choose Precision ABS Gray material. Precision ABS Gray has outstanding toughness, and its comprehensive physical properties are close to ABS engineering resin. It is the best performing resin among NextShapes engineering resins.

This material enables printed parts with high precision and dimensional stability and will burn out without leaving ashes or residue. Castable resin allows the production of parts directly from a digital design to investment casting through a single 3D-printed part, suitable for casting models in a variety of materials.

Always wear gloves
Whenever you're dealing with uncured resin, always wear gloves. Wash immediately with soap and water if contact occurs.

Ventilate your workspace
Ensure proper ventilation to avoid inhalation of resin and IPA fumes.

Dispose of properly
Cure resin before disposal. Do not pour resin down the drain.

Yes, please visit NextShapes' official website and leave a message. A regional manager will assist you.

If you need any support about the product, there will be a team of experts available to help you.

Please enjoy your purchase without worry.

inquiry
Email us Leave your contact

Email: info@nextshapes.com

Online time CNT: 8:30 am— 5:30 pm（workday）
Once we are online, we will contact you as soon as possible.

info@nextshapes.com

https://www.amazon.com/nextshapes

Filaments

General-Purpose PLA Series

Standard PLA、PLA Pro、Matte PLA、High-Temp PLA、PLA Silk

Package Download

General-Purpose PETG Series

PETG HF、Matte PET

Package Download

High-Performance Engineering Materials

PLA-CF、PETG-CF、ASA、ABS、PA6-CF、PA6-G

Package Download

Flexible & Elastic Series

TPU 95A、TPU 98A、PEBA 86A

Package Download

LCD/DLP Resin

General Resin Series

Standard Pro、Water Washable、High Speed

Package Download

Casting Resin Series

Casting

Package Download

Engineering Resin Series

Rigid Pro、Elastic、ABS-Like Pro

Package Download

Jewelry & Sculpt Resin Series

Hight Resolution 8K、Hight Resolution 12K、Hight Resolution 12K Pro

Package Download

Dental & Shoe Resin Series

Dental Model、Shoe Mold & Head Sculpt

Package Download

Clear Resin Series

Clear Pro、Clear

Package Download
inquiry
Filaments Video
resin usage tutorials are in progress, so stay tuned!

Resin usage tutorials are in progress, so stay tuned!